![]() |
滑條對中
本裝置用于織物平幅行進的糾偏,適用于各種機織、針織等布料的糾偏對中。平移滑條的設計使布料在行進過程中保持均衡的張力。變頻器驅動的滑條轉鼓保持與布料同線速度行進,特別適用于低張力的工藝要求。搭載兩輥開幅裝置,有效展開布料, 手輪調節兩根擴幅輥角度能達到將近360 °,使布面與擴幅輥接觸面(包角)可大范圍調節,使擴幅效果達到最佳。適用于各種機織、針織和無紡布等織物。根據使用要求的不同,可將對中傳感器換成對邊傳感器組成光電對邊裝置。
This device is used for rectifying the horizontal width of the fabric, which can be used in the rectifying and centering of various kinds of woven knitted fabrics. The design of slip-slip strip is designed to maintain a balanced tension in the process. And the frequency converter drive in the course of the process to maintain the same linear speed as the slider rotor drum driven maintains the same linear speed as the cloth, especially suitable for low tension process requirements. With carrying two roller drive device, it can effectively spread the cloth. The angle of the hand wheel adjustment of two spreading roll can reach nearly 360°, makes the cloth and spreading roll surface (wrap angle) can be a wide range of adjustment, makes the size enlarging effect reaching the best. It is applicable for the various kinds of weaving, knitting and nonwoven fabrics and other fabrics. According to the different requirements, the centering sensor can be changed to edge sensor to compose the photoelectric across edge device.
?擴幅輥:兩輥,直徑100,繞絲Φ>4或扁絲可選;
?糾偏方式:平移式滑條
?最大運行速度:80m/min
?工作寬度:1400-3600mm (200mm遞增)
?紅外檢測器:全幅檢測(對中)或U型傳感器(對邊)
?糾偏精度:5mm
?電機:擴幅:750W
?糾偏轉鼓同步電機:1.1KW或視門幅而定
?糾偏驅動方式:氣缸驅動
?Spreading roll: two rolls, diameter 100, wire winding Φ4 or ?at ?lament, which is optional
?Rectifying mode: translation motion sliders
?Max running speed: 80m/min
?W o r k i n g w i d t h : 1 4 0 0 - 3 6 0 0 m m ( 2 0 0 m m progressive increase)
?Infrared detector: Full amplitude detection (centering) or u-type sensor (across edge)
?Rectifying accuracy: 5mm
?Motor: Size enlarging: 750W
?Rectifying rotate drum synchronous motor: 1.1KW or depending on the width of fabric
?Rectifying drive mode: Cylinder drive